 |
CSA VRCA ANTI WATER HAMMER VALVE Body & Cap in GS-400 Epoxy Coated Stainless Steel Trim, Flanged PN16/25/40 Polyurethene Gasket Spring 555iCr6 Max Pressure 10 bar |
 |
FAR WATER HAMMER ARRESTOR Brass Body, EPDM GasketSet Temperature: 90ºC Max Pressure 50 bar Nominal Pressure 10 bar |
 |
FAR 2008 PRESSURE & TEMP RELIEF VALVE DZR Brass Body, Stainless Steel Spring Set Temperature: 92ºC Valve opens between 89ºC and 95ºC Set pressure from 2 to 10 bar |
 |
NABIC 500T PRESSURE & TEMP RELIEF VALVE Gunmetal Body, Viton Seat Max set pressure: 12.5 bar Max Temperature: 95ºC Max working temp. 75ºC Suitable for steam |
 Watts Model N36
|
NABIC 568 ANTI-VACUUM VALVE Bronze Brass Construction- also available in stainless steel PTFE to Metal Seating, Viton available Max Temp: -20ºC to 195ºC Max pressure: 13.5 bar |
 |
STAINLESS STEEL DOSING POT All Dosing Pots that are designed to 5500:2000 Category 3 (CE marked) have the following Max. 1″ connections |
 |
SPR40 STEAM SEPARATOR Carbon Steel Body Flanged PN40 For Steam and Compressed Air |
 |
VZO OIL METERS Flow: 1l/hr ro 30,000 l/hr Pulsed and non pulsed Please contact us for flow rates for correct sizing |
 |
WATER METER UNIONS
Price per pack of 2 |
 |
VYC MODEL 560 DRM – 1 SAMPLES WATER – COOLED For Steam Boilers Includes Needle and Ball Valve Max Temp: 340ºC Max. pressure: 140 bar |
  |
CIMBERIO THERMAL BALANCING VALVES CR Brass Body,Female BSP Temperature range: 40ºC – 60ºCPressure rating: PN25 Max. temperature: 90°C Incl disinfection module and gauge |
 |
RELIANCE THERMAL BALANCING VALVES DZR Brass Body,Female BSP Temperature range: 35ºC – 60ºCPressure rating: PN10 Max. temperature: 100°C Incl disinfection module and gauge |
 |
RELIANCE FLOREG VALVE 15mm Compression ends Isolating valve c/w strainers Max. temperature: 95°C Pressure rating: PN16 |
 |
RELIANCE DIFFERENTIAL BYPASS VALVE Brass Body, Stainless Steel Spring EPDM O Ring, POM Piston Pressure Rating PN10 Max. temperature: 110°C Differential Opening Pressure range 0-0.5 bar |
 |
CALEFFI RPZ BACKFLOW PREVENTORSDZR Brass Body, Female BSP Temperature range: 35ºC – 60ºC Pressure Rating PN10 Max. temperature: 100°C Incl disinfection module and gauge |
 |
EPDM PN16 RING GASKETS EPDM x 3mm For water services up to 90ºC BS2494 Full range from 15mm to 300mm |
 |
NOVUS SUPRA PN16 RING GASKETS Novus Supra x 1.5mm BS7531 WRC For Steam, oil and gas services Full range from 15mm to 300mm Recommended max temperature 400ºC |
 |
M16 HT ZINC PLATED BOLTS M20 HT ZINC PLATED BOLTS |
 |
HEX NUTS – ZINC PLATED HEX WASHERS – ZINC PLATED |
 |
PN6 SCREWED FLANGES |
 |
PN16 SCREWED FLANGES |
 |
SLIP ON PLATE FLANGES |
 |
WELD NECK FLANGES |
 |
BLANK FLANGES |
 |
311’s Irish Copper and Female BSP |
 |
CIM 723/Binder/Extended Test Plug Red or Blue Tags |
 |
Binder/Extended Test Plug Red or Blue Tags Test Gauge Probes Also available in stainless steel |
 |
TYPE SS/SSN SLIDING GUIDE SET For Steel, Copper or Stainless Steel pipework SSM for DN 80-100 |
 |
TYPE CAB/CABN CLEATED ANCHOR BRACKET For Steel, Copper or Stainless Steel pipework |
Our Products
Ball Valves
Gate Valves
Globe Valves
Check Valves
Y Strainers
Commissioning & Balancing Valves
Butterfly Valves
Pressure Reducing Valves
Safety Relief Valves
Goetze Valves
Cast Steel ANSI Valves
Mixing & Control Valves
Motorised/Actuated Valves
Hora Control Valves
ZUBI Knife Gate Valves
Float Valves
Foot Valves
Diaphragm Valves
Needle Valves
CSA Air Valves & Water/Sewage
CSA Automatic Control Valves
Gas Equipment
Pressure Gauges
Thermometers
VYC Steam Traps
VYC Check Valves
Air & Dirt Separators
Air Vents
Sight Glasses
Altecnic Caleffi Products
Expansion Joints
