Toraflex Expansion Joints

TORAFLEX S30 EPDM RUBBER BELLOWS
Twin Sphere, Galv. Unions, Screwed BSP
Max pressure: 16 bar, Max temp.: 110ºC
Axial compression 22mm
Axial extension 6mm
Also available in Nitrile Buna Rubber (NBR)
TORAFLEX S15 EPDM RUBBER BELLOWS
Single Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 110ºC  , Max Pressure 16 bar @ 20ºC
Axial compression 30mm
Axial extension 20mm
Length: 130mm
Larger sizes available
Also available in Nitrile Buna Rubber (NBR)
TIE RODS SETS FOR S15 BELLOWS
Limiting Tie Rods
Max Temp 110ºC, Max pressure 16 bar@20ºC
Axial compression 8mm-25mm
Axial extension 4mm -14mm
Also available in Nitrile Buna Rubber (NBR)

 4 Toraflex S10E (O) TORAFLEX S10 EPDM RUBBER BELLOWS
Single Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 110ºC , Max Pressure 16 bar @ 20ºC
Axial compression 8mm-25mm
Axial extension 4mm-14mm
Also available in Nitrile Buna rubber (NBR)

5 Red Band (O) ELAFLEX ERV-R RED BAND NITRILE BELLOWS
Single Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 90ºC , Max Pressure 16 bar @ 20ºC
Axial compression 10mm
Axial extension 5mm
Available in other materials for special applications
ELAFLEX ERV-G YELLOW BAND NITRILE BELLOWS
Single Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 110ºC , Max Pressure 16 bar @ 20ºC
Axial compression 10mm
Axial extension 5mm
Alternative rubber materials available
TORAFLEX S250 METAL COMPENSATORS
AISI 321 SS Bellows & Inner Sleeve
Butt Weld Ends in Carbon Steel
Axial Movement +10, -40mm

TORAFLEX S2501 METAL COMPENSATORS
ANSI 321 SS Bellows & Inner Sleeve
Butt Weld Ends in Stainless Steel
Axial Movement +10, -40mm
TORAFLEX S500 METAL COMPENSATORS
ANSI 321 SS Bellows & Inner Sleeve
PN16 Flanged Ends in Carbon Steel
Axial Movement +10, -25mm
TORAFLEX S10 NITRILE BELLOWS
Single Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 90ºC , Max Pressure 16 bar @ 20ºC
Axial compression 8mm-25mm
Axial extension 4mm-14mm
Suitable for Oils

TORAFLEX S20 EPDM RUBBER BELLOWS
Double Sphere, Mild Steel Flanges, Flanged PN16 (ANSI 150 on request)
Max Temp 90ºC  (up to 110ºC for short periods), Max Pressure 16 bar @ 20ºC
Axial compression 50mm-63mm
Axial Expansion 30mm-35mm
Alternative rubber materials available

4 abs axial exp joint-5 O ABS SCREWED AXIAL EXPANSION JOINTS
Membrane: 316 stainless steel
Inner: 316 stainless steel flow sleeves
Ends: 316 stainless steel BSPT males
 5 ABS Screwed axial (O)  AB SCREWED AXIAL EXPANSION JOINTS
Membrane: 316 Stainless Steel
Inner: 316 Stainless Steel Flow Sleeves
Ends: Mild Steel Flanged PN16, Stainless steel available
Tie Rods Available
 6 MRCA copper ended exp (O) edit MRCA COPPER ENDED EXPANSION JOINTSwras (O)
Membrane: 316 Stainless Steel
Copper Ends: BS2871 Table X
Design pressure: 6 bar
Design temperature: 70°C